CE6881-48S6CQ-B 02355MCU Data Center Network Switch 48*10G SFP+ 6*100G QSFP28
Description
CE6881-48S6CQ-B is a Data Center Network Switch of Huawei CloudEngine series. This Data Center Network Switch is a typical Leaf access switch designed for the Spine-Leaf architecture of modern cloud data centers. Its main task is to provide high-density and high-performance access for servers,Supports Telemetry technology, enabling real-time data collection and precise monitoring.
CE6881-48S6CQ-B Data Center Network Switch is equipped with 48*10G SFP+ 6*100G QSFP28
Pictures

Specification
|
|
02352QGF-006 (CE6881-48S6CQ switch, 48*10G SFP+, 6*100G QSFP28, without fan and power modules) 02352QGG-006 (CE6881-48S6CQ switch, 48*10G SFP+, 6*100G QSFP28, 2*AC power modules, 4*fan modules, port-side intake) 02355MCT (CE6881-48S6CQ switch, 48*10G SFP+, 6*100G QSFP28, without fan and power modules) 02355MCU (CE6881-48S6CQ-B switch, 48*10G SFP+, 6*100G QSFP28, 2*AC power modules, 4*fan modules, port-side intake) 02355MCV (CE6881-48S6CQ-F switch, 48*10G SFP+, 6*100G QSFP28, 2*AC power modules, 4*fan modules, port-side exhaust)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Weight without packaging[kg(lb)]
|
5.7 kg (12.57 lb) (excluding optical modules, power modules, and fan modules)
|
Maximum power consumption[W]
|
|
Typical power consumption[W]
|
- 194 W (100% throughput, SFP+ high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) - 240 W (100% throughput, short-distance optical modules on all ports, dual power modules)
|
Static power consumption[W]
|
|
|
|
|
Maximum heat dissipation[BTU/hour]
|
|
Typical heat dissipation[BTU/hour]
|
- 662 BTU/hour (100% throughput, SFP+ high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules) - 819 BTU/hour (100% throughput, short-distance optical modules on all ports, dual power modules)
|
Static heat dissipation[BTU/hour]
|
|
|
|
DC pluggable,AC pluggable,HVDC pluggable
|
|
|
- 600 W AC&240 V DC power module: 100 V AC to 240 V AC, 50/60 Hz; 240 V DC - 1000 W DC power module: –48 V DC to –60 V DC - 1200 W high-voltage DC power module: 240 V DC to 380 V DC
|
|
|
- 600 W AC&240 V DC power module: 90 V AC to 290 V AC, 45 Hz to 65 Hz; 190 V DC to 290 V DC - 1000 W DC power module: –38.4 V DC to –72 V DC - 1200 W high-voltage DC power module: 190 V DC to 400 V DC
|
|
|
- 600 W AC&240 V DC power module: 8 A (100 V AC to 240 V AC); 4 A (240 V DC) - 1000 W DC power module: 30 A (–48 V DC to –60 V DC) - 1200 W high-voltage DC power module: 8 A
|
|
|
- 600 W AC&240 V DC power module: 600 W - 1000 W DC power module: 1000 W - 1200 W high-voltage DC power module: 1200 W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Downlink Service interface
|
48*10GE SFP+ Note: 1. 10GE ports can be configured to work at 1 Gbit/s. Ports 13-16 and 25-28 can be configured to work at 10 Gbit/s or 1 Gbit/s using commands, and the speed of other ports can be auto-negotiated based on optical modules. (In V200R005C20, ports 13-16 and 25-28 cannot be configured to work at 1 Gbit/s. In V200R019C10 and later versions, they can be configured to work at 1 Gbit/s.) 2. 10GE LRM/80 km linear optical modules are not supported. 3. 10GE 1 m/3 m/5 m copper cables are supported.
|
|
|
6*100GE QSFP28 Note: 1. Each 100GE QSFP28 port can be configured to work at 40 Gbit/s. 2. In V200R022C00 and earlier versions, 100GE ports cannot be split. In V200R022C10, ports 5 and 6 can be split into 4 x 25GE or 4 x 10GE ports. Other ports cannot be split. 40GE/100GE port 5 supports only static split, and 40GE/100GE port 4 is deleted after split is configured. After split is canceled for 40GE/100GE port 5, 40GE/100GE port 5 can be restored, but 40GE/100GE port 4 can be restored only after the card is restarted. After a port is split, the port cannot be connected using a copper cable. When a copper cable is installed on the port, a message is displayed, indicating that the medium does not match. 3. 100GE and 40GE 1/3/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on stack ports and M-LAG peer-link ports. 100G 3/5 m copper cables support only RS FEC. After the non-RS FEC mode is configured, the port enters the error-down state.
|
Service port supporting the stack function
|
10GE and 100GE optical ports
|
|
|
|
Switching capacity[bps,bit/s]
|
For more details, see the datasheet/brochure or contact product sales personnel. You can obtain the datasheet/brochure from the following link: https://e.huawei.com/en/products/switches/data-center-switches
|
|
|
The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of time after a single fan module fails. You are advised to replace the faulty fan module immediately.
|
|
|
|
|
|
|
Power supply surge protection
|
- AC: 6 kV in common mode and 6 kV in differential mode - DC: 4 kV in common mode and 2 kV in differential mode - HVDC: 4 kV in common mode and 2 kV in differential mode
|
|
|
|
|
|
|
|
|
Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules
|
Storage temperature[°C(°F)]
|
-40ºC to +70ºC (-40°F to +158°F)
|
Long-term operating temperature[°C(°F)]
|
0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) Note: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
|
Storage relative humidity[RH]
|
5% RH to 95% RH, non-condensing
|
Long-term operating relative humidity[RH]
|
5% RH to 95% RH, non-condensing
|
|
|
|
Long-term operating altitude[m(ft.)]
|
|
|
|
|
|
|
|
Noise at high temperature (40°C, sound pressure)
|
- Front-to-back airflow: < 75 dB(A) - Back-to-front airflow: < 74 dB(A)
|
Noise at normal temperature (27°C, sound pressure)
|
- Front-to-back airflow: < 58 dB(A) - Back-to-front airflow: < 57 dB(A)
|
|
|
|

Our Service
100% Low Price Guarantee:
networks-equipments.com provides high-quality products at low wholesale prices
100% Quality Assurance:
All items are brand new and factory-sealed.For added assurance, each unit can be fully tested and verified to be in perfect working condition by engineer—upon your request.
100% Money Back Guarantee:
If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us.
Professional Technical Support:
networks-equipments.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.
Contact Us
| Tel |
+86 135 9465 3689 |
| Skype |
+86 135 9465 3689 |
| WhatsApp/Wechat |
+86 135 9465 3689 |
| Email |
KingKomosity@gmail.com |
| Website |
www.networks-equipments.com |
FAQ
1. Why choose us?
We are the leading Chinese supplier of quality networking equipments and we have over 10 years experience in this field.
2. What's the quality of the products?
All the items are brand original.
3. How to place an order?
After customer confirm the order , we will create an order as your request. We accept many terms of trade such as T/T,Wester,Union, Alibaba Orders, Alipy and etc.
4. How about the shipment?
We deliver products by FEDEX, DHL, ARAMEX, EMS, UPS, TNT and Air shipping & Ocean transportation. We are also able to deliver goods to your forwarder in China if you need.
5. How about the warranty?
1 Year warranty.
6. Do you test all your goods?
A: Yes, we have professional engineer to test all devices before shipping.
7. What if machine not work during warranty?
Technical support avaliable,if can't fixed, replacement or return with full refund acceptable.
8. How about your main products?
Our product lines include Switches, Routers, Server, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
9. What brand of products do you offer?
A: We can provide all common brands in the market