CE6865E-48S8CQ-B CE6863E-48S6CQ-B 48×25GE SFP28 + 8×100GE QSFP28 Enterprise Switch
Description
CloudEngine 6863-48S6CQ is an enterprise level data center switch launched by HW, positioned as a high-performance network switching device, suitable for deployment in data centers and enterprise network core layers. Its power supply is 417W, supporting dual power input modes of AC 90-290V and DC -38.4-72V, with high power supply flexibility.
The switch adopts a modular hardware design, equipped with 48 25GE SFP28 downstream ports and 6 40/100GE QSFP28 upstream ports. The backplane bandwidth reaches 4.8Tbps/76.8Tbps, and the packet forwarding rate is 1600Mpps, supporting high-density network access and high-speed data transmission. The body size is 442 × 420 × 43.6mm, with a weight of 7.8kg and a working temperature range of 0-40 ℃, suitable for standard computer room environment requirements. Support stacking, VLAN, QoS traffic management, IGMP Snooping multicast, and 802.1x authentication to meet enterprise level network management requirements
Pictures
![]()
Specification
|
nstallation Type
|
Cabinet Installation
|
|
Depth[mm]
|
420.0 mm
|
|
Chassis height[U]
|
1
|
|
Wide[mm]
|
442.0 mm
|
|
Height[mm]
|
43.6 mm
|
|
Weight with packaging[kg(lb)]
|
8.95 kg
|
|
Weight without packaging[kg(lb)]
|
5.7 kg (excluding optical modules, power modules, and fan modules)
|
|
Maximum power consumption[W]
|
384 W
|
|
Typical power consumption[W]
|
226 W (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules)
261 W (100% throughput, short-distance optical modules on all ports, dual power modules) |
|
Static power consumption[W]
|
167 W
|
|
Heat dissipation mode
|
Air cooling
|
|
Maximum heat dissipation[BTU/hour]
|
1310 BTU/hour
|
|
Typical heat dissipation[BTU/hour]
|
771 BTU/hour (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules)
891 BTU/hour (100% throughput, short-distance optical modules on all ports, dual power modules) |
|
Static heat dissipation[BTU/hour]
|
570 BTU/hour
|
|
Power supply mode
|
DC pluggable,AC pluggable,HVDC pluggable
|
|
Rated input voltage[V]
|
Rated AC input voltage range: 100 V AC to 240 V AC; 50/60 Hz
Rated –48 V DC input voltage range: –48 V DC to –60 V DC Rated input voltage range for 600 W AC & 240 V DC: 240 V DC Rated input voltage range for 1200 W HVDC: 240 V DC to 380 V DC |
|
Input voltage range[V]
|
Maximum AC input voltage range: 90 V AC to 290 V AC; 45 Hz to 65 Hz
Maximum –48 V DC input voltage range: –38.4 V DC to –72 V DC Maximum input voltage range for 600 W AC & 240 V DC: 190 V DC to 290 V DC Maximum input voltage range for 1200 W HVDC: 190 V DC to 400 V DC |
|
Maximum input current[A]
|
600 W AC&240 V DC power module (PAC600S12 series):
- 8 A (100 V AC to 240 V AC) - 4 A (240 V DC) 1000 W DC power module (PDC1000S12 series): 30 A (–48 V DC to –60 V DC) 1200 W high-voltage DC power module (PHD1K2S12 series): 8 A |
|
Rated output power[W]
|
600 W (AC&240 V HVDC)
1000 W (–48 V DC) 1200 W (380 V HVDC) |
|
Memory
|
DRAM: 4 GB
|
|
NOR Flash
|
64 MB
|
|
NAND Flash
|
4 GB
|
|
USB
|
Supported
|
|
Console port
|
RJ45
|
|
Downlink Service interface
|
48*25GE SFP28 (Note: 1. 25GE ports can be configured to work at 10 Gbit/s or 1 Gbit/s. Every four downlink 25GE ports form a group, and can be configured to work at 10 Gbit/s or 1 Gbit/s through the command; 2. 10GE LRM/80KM linear optical modules are not supported; 3. 1 m 25GE copper cables and 1 m/3 m/5 m 10GE copper cables are supported, and auto-negotiation of copper cables is not supported; 4. 25GE copper cables can only be used on stack ports and M-LAG peer-link ports.)
|
|
Uplink Service interface
|
6*100GE QSFP28
Note: 1. Each 100GE QSFP28 port can be configured to work at 40 Gbit/s. 2. A 100GE QSFP28 port cannot be split into 4 x 25GE or 4 x 10GE ports. 3. 100GE and 40GE 1/3/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on stack ports and M-LAG peer-link ports. 100G 3/5 m copper cables support only RS FEC. After the non-RS FEC mode is configured, the port enters the error-down state. |
|
Service port supporting the stack function
|
25GE optical ports, and 100GE optical ports
|
|
RTC
|
Supported
|
|
Switching capacity[bps,bit/s]
|
For more details, see the datasheet/brochure or contact product sales personnel.
You can obtain the datasheet/brochure from the following link: |
|
Redundant fans
|
The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of time after a single fan module fails. You are advised to replace the faulty fan module immediately.
|
|
Redundant power supply
|
1+1 backup
|
|
Number of power modules
|
2
|
|
Power supply surge protection
|
AC: 6 kV in common mode and 6 kV in differential mode
DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common mode and 2 kV in differential mode |
|
Types of fans
|
Pluggable
|
|
Number of fan modules
|
4
|
|
Airflow direction
|
Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules
|
|
Storage temperature[°C(°F)]
|
–40°C to +70°C (–40°F to +158°F)
|
|
Long-term operating temperature[°C(°F)]
|
0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.)
Note: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
|
Storage relative humidity[RH]
|
5% RH to 95% RH, non-condensing
|
|
Long-term operating relative humidity[RH]
|
5% RH to 95% RH, non-condensing
|
|
Storage altitude[m(ft.)]
|
≤ 5000 m (16404 ft.)
|
|
Long-term operating altitude[m(ft.)]
|
≤ 5000 m (16404 ft.)
|
|
MTBF[year]
|
47.81 years
|
|
MTTR[hour]
|
1.95 hours
|
|
Noise at high temperature (40°C, sound pressure)
|
- Front-to-back airflow: < 75 dB(A)
- Back-to-front airflow: < 74 dB(A) |
|
Noise at normal temperature (27°C, sound pressure)
|
- Front-to-back airflow: < 58 dB(A)
- Back-to-front airflow: < 57 dB(A) |
|
Availability
|
0.9999962836
|
![]()
Our Service
100% Low Price Guarantee:
networks-equipments.com provides high-quality products at low wholesale prices
100% Quality Assurance:
All items are brand new and factory-sealed.For added assurance, each unit can be fully tested and verified to be in perfect working condition by engineer—upon your request.
100% Money Back Guarantee:
If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us.
Professional Technical Support:
networks-equipments.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.
FAQ
1. Why choose us?
We are the leading Chinese supplier of quality networking equipments and we have over 10 years experience in this field.
2. What's the quality of the products?
All the items are brand original.
3. How to place an order?
After customer confirm the order , we will create an order as your request. We accept many terms of trade such as T/T,Wester,Union, Alibaba Orders, Alipy and etc.
4. How about the shipment?
We deliver products by FEDEX, DHL, ARAMEX, EMS, UPS, TNT and Air shipping & Ocean transportation. We are also able to deliver goods to your forwarder in China if you need.
5. How about the warranty?
1 Year warranty.
6. Do you test all your goods?
A: Yes, we have professional engineer to test all devices before shipping.
7. What if machine not work during warranty?
Technical support avaliable,if can't fixed, replacement or return with full refund acceptable.
8. How about your main products?
Our product lines include Switches, Routers, Server, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
9. What brand of products do you offer?
A: We can provide all common brands in the market